====== SmartMonTools et SmartCtl ======
===== Installation =====
<code bash>
sudo apt install smartmontools
</code>
===== Test =====
==== Lister les devices ====
avec ''sudo smartctl --scan''
<code bash>
thierry@c3po:~$ sudo smartctl --scan
/dev/sda -d scsi # /dev/sda, SCSI device
/dev/sdb -d scsi # /dev/sdb, SCSI device
/dev/sdc -d scsi # /dev/sdc, SCSI device
/dev/sdd -d scsi # /dev/sdd, SCSI device
/dev/sde -d scsi # /dev/sde, SCSI device
/dev/sdf -d scsi # /dev/sdf, SCSI device
/dev/sdg -d scsi # /dev/sdg, SCSI device
/dev/sdh -d scsi # /dev/sdh, SCSI device
/dev/sdi -d scsi # /dev/sdi, SCSI device
</code>
==== Information sur un device ====
avec ''sudo smartctl -i /dev/XXX''
<code bash>
thierry@c3po:~$ sudo smartctl -i /dev/sda
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-138-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     SAMSUNG SpinPoint F3
Device Model:     SAMSUNG HD502HJ
Serial Number:    S20BXXXXX1791
LU WWN Device Id: 5 0024e9 201c0d9cd
Firmware Version: 1AJ10001
User Capacity:    500 107 862 016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Sat Nov  3 14:07:00 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
</code>
On constate que ''SMART support is: Enabled'' et c'est cool !

===== Avec Webmin =====
Avec [[linux:service:webmin:webmin|Webmin]] on peut accéder et surveiller l’état SMART des disques.

{{:linix:service:0311181409.jpg?600|}}
===== Sources =====
  * [[https://doc.ubuntu-fr.org/smartmontools]]
  * [[http://www.smartmontools.org]]